Français
English
Español
Deutsch
.
There are 40 products.
 |
 |
 |
 |
| 0° | 230 mm | 240 x 230 mm | 230 |
Main drive motor 1.0 - 1.3 kW
0.37 kW hydraulic motor
Cooling pump 0.12 kW
0.25 kW feed motor
Blade speed 15 - 120 m/min.
Blade dimensions 2730 x 27 x 0.9 mm
Working height 590 mm
Weight 530 kg
Length 1400 mm
Width 1100 mm
Height 1160 mm
Fully automatic band saws for cutting solid bars, tubes and sections of steel, light cast iron and non-ferrous materials. 90-degree cut only. Made entirely of steel. Oil-bath reduction gearing and carbide shoes and rollers in the blade guides. The front jaw consists of several hardened rollers driven by an electric motor via a worm and wheel. The rear vise consists of several freely rotating rollers. A limit switch mounted on top of the vise stops the machine when the block is exhausted. Once the workpiece is clamped between the rollers, no further clamping is necessary. The workpiece is fed through the vise to the bar stop which contains a micro switch controlling the bar feed motor. A parts counter monitors the number of cuts. The machines stop automatically in the event of blade breakage. The machines are equipped with a removable coolant tank incorporating a submersible electric pump that supplies coolant to both guide assemblies. A bi-metal saw blade and a 1.2-meter infeed roller table are supplied as standard.
|
|
|
|
| 0° | 320 mm | 450 x 320 mm | 320 mm |
| +30° | 320 mm | 380 x 320 mm | 320 mm |
| +45° | 320 mm | 330 x 320 mm | 320 mm |
| -30° | 320 mm | 380 x 320 mm | 320 mm |
| -45° | 320 mm | 300 x 320 mm | 300 mm |
| -60° | 230 mm | 230 x 220 mm | 220 mm |
Main drive motor 2.2 kW
0.37 kW hydraulic motor
Cooling pump 0.12 kW
Blade speed 15-120 m/min
Blade dimensions 4160 x 34 x 1.1 mm
Working height 860 mm
Weight 1030 kg
Length 2230 mm
Width 1150 mm
Height 2140 mm
Rotation diameter above the bed: 545 mm
Rotation diameter above the support: 312 mm
Turning length: 3000 mm
Spindle bore: 52 mm
Variable speed drive
Machine in excellent condition
BEKAMAK BMSY-270DGH semi-automatic metal band saw
Left and right bias cut
Top Dead Center Sensor
Saw blade dimensions 3160 x 27 x 0.9 mm
Rectangular 45° sawing capacity R-180 x 180, L-240 x 160 mm
45° round sawing capacity R-210, L-240 mm
45° square sawing capacity R-180, L-240 mm
Rectangular 60° sawing capacity 150 mm
Sawing capacity at 60° round 160 mm
Sawing capacity at 60° square 150 mm
Rectangular 90° sawing capacity 350 x 220 mm
90° round sawing capacity 270 mm
90° square sawing capacity 260 mm
Cutting speed 20 - 100 m/min
Engine power 1.5 kW
Net weight 430 kg
Voltage 400 V
Object height 935 mm
Machine dimensions 1730 x 770 x 1460 mm
Large batch of tools
Protective laser
CNC bending table
CN CYBELEC DNC 880 S
CNC axes: Y1/Y2/X/R
Z1/Z2 manuals
Year 2006
ABOVE-GROUND MACHINE
Protective laser
CNC axes: Y1/Y2/X
Manual axes: Z1/Z2/R1/R2
NEW UPPER AND LOWER TOOLS!!
CYBELEC CYBTOUCH 12 graphic CN
Controlled descent
90° round sawing capacity 225 mm
90° sawing capacity
rectangular 245 x 150 mm
90° square sawing capacity 190 mm
Sawing capacity at 45° round 145 mm
45° sawing capacity
rectangular 150 x 190 mm
Sawing capacity at 45° square 145 mm
Sawing capacity at 60° round 90 mm
Sawing capacity at 60°
rectangular 90 x 115 mm
Sawing capacity at 60° square 90 mm
Saw blade dimensions 2480 x 27 x
0.9 mm
Engine power 1.1 kW
Pump power of
cooling 0.1 kW
Cutting speed 45 - 90
m/min
Number of cutting speeds 2
Object height 940 mm
Voltage 400 V
Weight 195 kg
Machine dimensions 1450 x 510 x
1450 mm
NEW INTERMEDIATES/PUNCHES/DIES.
Protective laser
CNC bending table
CN CYBELEC MODEVA 10S
CNC axes: Y1/Y2/X/R
Z1/Z2 manuals
Year 2009
ABOVE-GROUND MACHINE
3050 x 110 tons
3 Axes
CN CYBELEC DNC 880 S
Distance between uprights: 2550 mm
Stroke: 130 mm
Max. distance from slide table: 310 mm
Table width: 180 mm
Engine power: 14 kW
New top and bottom tools.
Dimensions: 3500 x 2100 x 2500 mm
Weight: approximately 7500 kg
| Saw blade dimensions | : 27x0.9x2720 mm |
| Blade speed | : 35-70 m/min |
| Engine power | : 1.0-1.5 kW |
| Tension | : 400 V |
| 90° round cutting capacity | : 230 mm |
| 90° rectangular cutting capacity | : 320x130 mm |
| 90° square cutting capacity | : 230 mm |
| 60° round cutting capacity | : 120 mm |
| 60° rectangular cutting capacity | : 120x105 mm |
| Cutting capacity at 60° square | : 105 mm |
| 45° right round cutting capacity | : 180 mm |
| 45° right rectangular cutting capacity | : 220x60 mm |
| Cutting capacity at 45° right square | : 150 mm |
| 45° left round cutting capacity | : 220 mm |
| 45° left rectangular cutting capacity | : 230x140 mm |
| Cutting capacity at 45° left square | : 190 mm |
| Dimensions | : 1350x900x1300 mm |
| Net weight | : 410 kg |
Separate control panel.
Hydraulic vice.
Pedal operation.
Semi-automatic hydraulic machine.
|
|
|
|
| 0° | 350 mm | 400 x 350 mm | 350 mm |
| +30° | 320 mm | 400 x 230 mm | 350 mm |
| +45° | 320 mm | 260 x 350 mm | 280 mm |
Main drive motor 2.2 kW
0.37 kW hydraulic motor
Cooling pump 0.12 kW
0.25 kW feed motor
Blade speed 15-120 m/min
Blade dimensions 4160 x 34 x 1.1 mm
Working height 760 mm
Weight 1050 kg
Length 2450 mm
Width 920 mm
Height 2020 mm
ELGO Positioner
Electric blade clearance adjustment.
Pneumatic, single-piece rear support/guide for thin sheet metal, length 800 mm, for sheet metal up to 3 mm.
1500 mm square stop + 2 1000 mm supports
Hydraulic bending
CN CYBELEC DNC 800
NC axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2
Hydraulic clamping of punches
Split tooling
ABOVE-GROUND MACHINE
Minimum and maximum dimensions of sheets (punched blanks):
Dimensions [mm]
Minimum / maximum length 285 / 2495
Minimum / maximum width 190 / 1524
Maximum diagonal 2500
Maximum centering dimension 2495
Maximum sheet thickness s per bending angle: 2.0 mm per ±135° 2.0 mm per ±90° 1.0 mm per ±90°
Maximum bending angle per sheet thickness s: ±135° per 2.0 mm ±90° per 2.0 mm ±90° per 1.0 mm
Maximum sheet thickness for a hand-saving fold: 2.0 mm 1.2 mm
Year 2010
Protective laser
CNC bending table
CN ESA
NC axes: Y1/Y2/X1/X2/Z1/Z2/R/R2/R3/A1/A2
WILA top and bottom clamping
DELIVERED WITHOUT TOOLS
Sheet metal workers
Accompanying parking area
Year 2010
ABOVE-GROUND MACHINE
CN CYBELEC CYBTOUCH 8.
Automatic clearance adjustment between blades.
Automatic hydraulic cutting angle adjustment.
Pneumatic, single-piece rear support for thin sheet metal, length 800 mm, for sheet metal up to 3 mm.
2000 mm square stop + 2 1000 mm supports.
Centralized lubrication.
Protective laser
CNC bending table
CNC axes: Y1/Y2/X/R
Manual axis: Z1/Z2
Split tool lot
CYBELEC CYBTOUCH 12 graphic CN
NEAR NEW CONDITION
Pneumatic thin sheet metal rear support 560 mm
LASER cutting line
Retractable stop
Automatic clearance adjustment
Oil heater
