Possibility to program rear and front neutral point. Power: 30 tons Max. flat iron bending capacity: 200 x 18 mm (with the optional suitable tooling) Max. tube bending capacity: Ø60 x 4 mm (with the optional suitable tooling) Max. stroke: 285 mm Tool height: 250 mm Working and return speed: 10 mm/sec Electrical power: 3kW Weight: 1050 kg Table dimensions: 660 x 1250 mm Working height: 930 mm Dimensions: 1250 x 650 x 1250 mm

New Siemens digital control with touch screen.

With the Siemens touchscreen you can set the following parameters:

Maximum upward and downward stroke of the hydraulic cylinder

Pressure holding time on the lower platform

Work pressure

Decompression time

Coin counter

Up/Down Prestop: A function that allows you to stop the ascent or descent before reaching the quota, thus eliminating errors caused by speed and cavitation due to the weight of the mold. It guarantees an accuracy of 0.1 mm.

Alarm management

There is the possibility to store 100 different programs with progressive numbering.

You can choose between manual and automatic modes.

In automatic mode, the cylinder rises automatically.

The race is read using a wired encoder.

The pressure is read using a transducer installed on the hydraulic unit

ROUNDO R 5 profile bending machine.

Capacity see photo sheet

Dimensions: 1900 x 1200 x 1600

Large batch of rollers (standard and diameter 110 and 85 mm tubes)

Drilling capacity 40 mm

Drilling depth 180 mm

MT4 spindle taper

M24 tapping capacity

Feed range 0.1 - 0.2

mm/turn

Speed range of the

pin

0 - 1800 (vario)

rpm

Column diameter 150 mm

Spindle-column distance 350 mm

Table dimensions 560 x 560 mm

Foot dimensions 730 x 500 mm

Number of speed ranges 2

Packaging dimensions 730 x 560 x 2220

mm

Height 2400 mm

Net weight 460 kg

Engine power 1.5 kW

Voltage 400 V

Manual length and angle positioner for 6000 mm tube length

Bending capacity available in the attached PDF technical documentation.

Semi-automatic band saw HU 300 HAC

Blade dimension: 2965x27x0.9

Engine power: 1.2 kW

Cutting speed: 37-76 mm/min

90° round cutting capacity: 260 mm

90° square cutting capacity: 255 mm

90° rectangular cutting capacity: 295x230 mm

Round cutting capacity at 60°: 160 mm

Square cutting capacity at 60°: 130 mm

Rectangular cutting capacity at 60°: 160x130 mm

Round cutting capacity at 45°: 240 mm

45° square cutting capacity: 215 mm

45° rectangular cutting capacity: 225x215 mm

Equipped with:

Right and left angular cut

Hydrolytic clamping vice

2-speed motor

Lubrication

Exposure machine

Price excluding VAT

Video available further down this page.

Drilling capacity 32 mm

Drilling depth 120 mm

MT 3 spindle taper

Spindle - column distance [255 mm]

Maximum spindle distance -

table [580 mm]

Maximum spindle distance -

foot [1090 mm]

Table dimensions 475 x 425 mm

T-slots [3x M16]

Column diameter 92 mm

Speed range of the

pin

[120-3850

[omw/min]

Number of speeds [12]

Engine power 1.5 kW

Voltage 400 V

Weight 139 kg

Machine dimensions [900 x 530 x

1700 mm]