Possibility to program rear and front neutral point. Power: 30 tons Max. flat iron bending capacity: 200 x 18 mm (with the optional suitable tooling) Max. tube bending capacity: Ø60 x 4 mm (with the optional suitable tooling) Max. stroke: 285 mm Tool height: 250 mm Working and return speed: 10 mm/sec Electrical power: 3kW Weight: 1050 kg Table dimensions: 660 x 1250 mm Working height: 930 mm Dimensions: 1250 x 650 x 1250 mm

New Siemens digital control with touch screen.

With the Siemens touchscreen you can set the following parameters:

Maximum upward and downward stroke of the hydraulic cylinder

Pressure holding time on the lower platform

Work pressure

Decompression time

Coin counter

Up/Down Prestop: A function that allows you to stop the ascent or descent before reaching the quota, thus eliminating errors caused by speed and cavitation due to the weight of the mold. It guarantees an accuracy of 0.1 mm.

Alarm management

There is the possibility to store 100 different programs with progressive numbering.

You can choose between manual and automatic modes.

In automatic mode, the cylinder rises automatically.

The race is read using a wired encoder.

The pressure is read using a transducer installed on the hydraulic unit

ROUNDO R 5 profile bending machine.

Capacity see photo sheet

Dimensions: 1900 x 1200 x 1600

Large batch of rollers (standard and diameter 110 and 85 mm tubes)

Manual length and angle positioner for 6000 mm tube length

Bending capacity available in the attached PDF technical documentation.

30 Ton APS 70 Hydraulic Portable Punching Machine Max. diameter 22 mm Max. oblong 22 x 14 mm Max. steel thickness at 42 kg2/mm 13 mm With trolley

Sahinler HKM 65V hydraulic punching and shearing machine

SAH HKM65V

Compact and stable machine thanks to the vertical arrangement of the cylinder

This machine is equipped with 5 processing stations powered by 1 hydraulic cylinder. This allows the machine to: punch round, oval and square holes; flat material, corner profiles, cut round and square shapes; corners in flat material.

Technical characteristics

Power: 65 tons

Swan neck: 240 mm

Working height: 1050 mm

Punching capacity: Ø 22 x 20 mm thick

Flat cutting material: 350 x 15 mm / 250 x 19 mm

Cutting angle profile: 100 x 100 x 10 mm

Cutter bar material: Ø 40 mm (round)

Rectangular notcher: 90 x 50 x 8 mm

Motor power: 5.5 kW (3 x 400 V)

Dimensions: 1180 x 900 x 1720 mm

Weight: 1215 kg

NEW BLADES.

New guides

Blade length: 205 mm

60 cps/min

Table: 1000 x 800 mm

Steel capacity:

Angles from 30° to 135°: 4 mm

Angles from 60° to 135°: 6 mm

Stainless steel capacity:

Angles from 30° to 135°: 3 mm

Angles from 60° to 135°: 4 mm